Open now  Mon-Fri 9-5   Sat 10-3   Sun closed  ยท  24/7 towing (416) 661-6665  ยท  [email protected]

Brake Replacement and Repair

Stop shorter, drive safer, with complete brake service.

Service detail

Stop shorter, drive safer, with complete brake service.

Brakes are your car most important safety system, and they wear a little every time you drive. Pads thin out, rotors develop grooves and rust, calipers can stick, and brake fluid absorbs moisture over time which lowers its boiling point.

We service the complete system: pads, rotors, calipers, hoses, hardware and fluid. Every brake job is measured, machined or replaced to spec, then road tested and bedded so the pedal feels firm and stops are quiet from day one.

Brake Replacement and Repair being performed at Apex Collision Center

Serving North York and the GTA

Drivers from across Toronto, Mississauga, Scarborough, Etobicoke, Vaughan and Markham trust Apex for brake replacement and repair. Our shop is at Unit 41 & 42, 4544 Dufferin Street, Toronto, ON M3H 5X2, right off Highway 401.

Warning signs

How to tell you need it

  • Squealing, squeaking or grinding when you brake
  • Brake pedal feels soft, spongy or sinks low
  • Car pulls to one side while braking
  • Vibration or pulsing through the pedal or steering wheel
  • Brake warning light is on, or stopping distances feel longer
Noticing any of these? Book an inspection and we will confirm what is going on before you spend a dollar on repairs.
Our process

How we do it

Measure everything

Pad thickness, rotor thickness and runout, caliper slide movement and fluid condition are all measured and recorded.

Replace or machine

Pads are replaced, rotors are machined or replaced to stay above minimum thickness, and sticking calipers are serviced or replaced.

Hardware and fluid

New hardware, shims and lubricant where required, plus a brake fluid flush if the fluid is old or contaminated.

Bed and road test

Pads are bedded to the rotors and the car is road tested to confirm a firm pedal, straight stops and no noise.

The fine print, up front

What is included, how long it takes, how we price it

What is included

  • Pad and rotor thickness measured with the numbers shown to you
  • Caliper, slide pin and brake hose inspection
  • Quality pads and rotors matched to your vehicle
  • Hardware cleaned or replaced, calipers serviced
  • Brake fluid condition check
  • Proper bedding procedure and a road test on every brake job

How long it takes

A standard pad and rotor service takes 2 to 3 hours. Caliper or brake line work can extend the visit.

How pricing works

Priced per axle with parts and labour broken out in writing. Rotor condition decides whether resurfacing or replacement is the honest call, and we show you the measurements.

Straight answers

Brake Replacement and Repair questions

If the rotor is thick enough and not cracked or severely rusted, machining restores a true surface for less money. We measure first and show you the numbers, then recommend whichever is right.

Light surface rust forms overnight, especially in humid weather, and wipes off after a few stops. Constant squealing while driving usually means the wear indicators are touching and the pads are due.

Typically 40,000 to 70,000 km depending on driving style, traffic and pad material. We measure pad thickness at every visit so you get a real answer for your car.

Keep exploring

Related services

Engine Repair and Maintenance service at Apex Collision Center

Engine Repair and Maintenance

Engine diagnostics, tune ups, gaskets, seals and mechanical repairs for all makes and models.

Learn more →
Coolant Flush service at Apex Collision Center

Coolant Flush

Complete cooling system flush with fresh antifreeze mixed for Canadian winters, plus pressure testing.

Learn more →
Ball Joint Replacement service at Apex Collision Center

Ball Joint Replacement

Ball joint and control arm replacement with proper torque specs and a road test on every job.

Learn more →

Your car deserves the Apex treatment

Call, email or book online. We will diagnose the issue, give you an upfront price, and get you back on the road with work done right the first time.

Call (416) 661-6665